Toilets have two main parts, the tank and the bowl. The tank holds water for flushing and the bowl is used for the actual flushing action. These are the only moving parts. However, toilets can still have problems.
The most common problem with a toilet is leaks. Leaks can occur when the bolts securing the bowl to the tank become loose or broken. Water can get out and can cause damage to your floors, walls, and other parts of your home. Even a small leak can cost you money on your water bill and can potentially grow mold on the floor.
Another common toilet problem is a continuous running toilet. This is a waste of both water and resources. If your toilet has an unidentified source of water, it may be time to investigate the source. There are a few ways to diagnose this type of problem.
One way to find out what the source of the leaking water is to remove the tank lid. This will allow you to see the water supply valve inside the tank. You can then adjust the fill valve to lower the water level.
When a toilet takes a long time to fill, it might be a sign of a problem with the water supply line. A supply line that is leaking can be replaced with a stainless steel braided line from your local hardware store.
The float arm is another item that can be tangled, loose, or broken. It can be bent up or down depending on how low the toilet is sitting. To fix this problem, you will need to use a screwdriver and an adjustable wrench. Tightening the nut can help steady the arm.
Another thing to check out is the flapper. It is a very simple part to replace. Using a food dye solution can tell you if there is a problem with the seal. Be sure to place the replacement seal where the old one was.
In addition to the flapper and float, there are other items in your toilet that can malfunction. Some of these include the lift chain and the handle. While a simple repair can be done by yourself, you can save yourself some hassle and call a toilet repair specialist for a more complicated job.
Other parts of your toilet may need to be repaired, such as the tank. There are also a few things that you can do to clear a clog, such as using a plunger. Although it may sound like an inconvenient task, a plunger can solve most toilet clogs.
Before you attempt any repairs to your toilet, be sure to shut off the water first. Turning off the water will allow you to tighten the handles correctly. Using a rubber plunger is also a good idea if you have a clog.
If you are experiencing a toilet clog or other common plumbing problem, you should be prepared to do some research and to hire a professional to make the necessary repairs. Not only will a plumbing expert diagnose your plumbing issue, they will provide you with the best possible solutions to your needs. For more details on plumbing repair click here.